乐虎国际电子游戏手机版

联系我们

乐虎国际手机app_乐虎国际游戏官网_乐虎国际电子游戏手机版

乐虎:黄经理

电话:0312-2200737

手机:13582266002

地址:保定市游戏区国际工业区

行业新闻
模乐虎的结构游戏性
模乐虎的结构游戏性
Structural process of die forgings
国际主要靠锻模模膛使坯料电子游戏,乐虎形状比较复杂。但为减少制模成本和简化国际游戏,设计国际零件时,应根据国际特点和游戏要求,使零件结构符合下列原则,以便于国际生产和降低成本。
The die forging mainly depends on the forging die cavity to form the blank and the shape of the forging is rather complicated. In order to reduce die cost and simplify die forging process, the design of die forging parts should be based on the characteristics of die forging and process requirements to make the structure of the parts conform to the following principles, so as to facilitate the production of die forging and reduce the cost.

(1)国际零件必须具有一个合理的分模面,以保证模乐虎易于从锻模中取出,又利于金属充填、减少余块和敷料,锻模容易制造。
(1) the die forging parts must have a reasonable parting surface to ensure that the die forgings are easily removed from the forging die, and it is also conducive to the metal filling, the reduction of the remaining blocks and dressings, and the forging die is easy to be made.

(2)与分模面垂直的非加工面应设计出国际斜度,以利于从模膛中取出乐虎。非加工面的交接处应采用圆角过渡,以利于金属在模膛中流动充填和防止产生应力集中。
(2) the die forging slope should be designed for the non machined surface perpendicular to the parting plane, so as to facilitate the removal of the forgings from the mold cavity. The fillet transition should be adopted at the intersection of non machined surfaces, so as to facilitate the flow and filling of metal in the mold cavity and prevent stress concentration.
Structural process of die forgings
国际主要靠锻模模膛使坯料电子游戏,乐虎形状比较复杂。但为减少制模成本和简化国际游戏,设计国际零件时,应根据国际特点和游戏要求,使零件结构符合下列原则,以便于国际生产和降低成本。
The die forging mainly depends on the forging die cavity to form the blank and the shape of the forging is rather complicated. In order to reduce die cost and simplify die forging process, the design of die forging parts should be based on the characteristics of die forging and process requirements to make the structure of the parts conform to the following principles, so as to facilitate the production of die forging and reduce the cost.

(1)国际零件必须具有一个合理的分模面,以保证模乐虎易于从锻模中取出,又利于金属充填、减少余块和敷料,锻模容易制造。
(1) the die forging parts must have a reasonable parting surface to ensure that the die forgings are easily removed from the forging die, and it is also conducive to the metal filling, the reduction of the remaining blocks and dressings, and the forging die is easy to be made.

(2)与分模面垂直的非加工面应设计出国际斜度,以利于从模膛中取出乐虎。非加工面的交接处应采用圆角过渡,以利于金属在模膛中流动充填和防止产生应力集中。
(2) the die forging slope should be designed for the non machined surface perpendicular to the parting plane, so as to facilitate the removal of the forgings from the mold cavity. The fillet transition should be adopted at the intersection of non machined surfaces, so as to facilitate the flow and filling of metal in the mold cavity and prevent stress concentration.
  1. 乐虎:黄经理
  2. 电话:0312-2200737
  3. 手机:13582266002
  4. 网址:www.wwyu-info.com
  5. 地址:保定市游戏区国际工业区

版权 © 乐虎国际手机app_乐虎国际游戏官网_乐虎国际电子游戏手机版 网址:www.wwyu-info.com 推荐:模乐虎,精密模乐虎加工,汽车模乐虎,电子游戏模乐虎  网站制作:保定遨游公司

必发88|官网乐虎游戏官网老虎机必发88|官网