乐虎国际电子游戏手机版

联系我们

乐虎国际手机app_乐虎国际游戏官网_乐虎国际电子游戏手机版

乐虎:黄经理

电话:0312-2200737

手机:13582266002

地址:保定市游戏区国际工业区

行业新闻
锻造乐虎时国际变形游戏
一、制坯工步或制坯模膛
1. Blank manufacture step or blank mold chamber

镦粗:镦粗坯料,使坯料的高度减小,直径增大。用于饼类乐虎的制坯。使坯料直径与乐虎相接近,有利于乐虎的电子游戏,减少终锻锤击次数,提高模膛寿命,并能除去坯料侧手机版上的氧化皮。
Upsetting: upsetting billet reduces the height of the billet and increases the diameter. The billet used for the forgings of the cake. The diameter of the blank is close to the forging, which is beneficial to the www.bdwjmc.com www.yimilange.com  www.aoerjiamenchuang.com www.bdfscl.cn www.zkzscl.com www.keshun0312.comforming of the forgings, reducing the number of hammer strikes, improving the life of the die, and removing the oxide skin on the surface of the blank.

压扁:压扁坯料,使坯料变扁增宽,压扁后坯料的长度几乎不变。多用于外形扁宽的乐虎制坯。
Flattening: flattening the blank so that the blank becomes flat and widened, and the length of the billet is almost unchanged after flattening. Most of the forgings are made of flat and wide shape.
滚挤:使坯料局部横截面增大,相邻部分减小,稍许增加坯料的长度。经过滚压后,坯料沿轴线准确分配体积,使手机版光滑圆浑。操作时坯料绕轴线作90°翻转,不作进给。
Roll extrusion: the local cross section of the billet is enlarged, the adjacent part is reduced, and the length of the billet is slightly increased. After rolling, the volume of the billet is accurately distributed along the axis, making the surface smooth and round. During operation, the billet is turned 90 degrees around the axis without feeding.

拔长:减小坯料局部横截面面积,使坯料长度增加,从而使坯料的体积沿轴线重新分配。操作时坯料绕电子游戏轴线作90°翻转并沿轴线向模膛进给。
Pull out: reduce the local cross sectional area of billet, increase the length of billet, so that the volume of the billet is redistributed along the axis. During operation, the billet is turned 90 degrees around the blank axis and fed along the axis to the mold cavity.

压肩:使坯料的局部截面略有增加,压下部分展宽。操作时坯料一般不翻转。
Press shoulder: make the local section of the billet slightly increase, and the part of the press is widened. In general, the blank is not turned over.
  1. 乐虎:黄经理
  2. 电话:0312-2200737
  3. 手机:13582266002
  4. 网址:www.wwyu-info.com
  5. 地址:保定市游戏区国际工业区

版权 © 乐虎国际手机app_乐虎国际游戏官网_乐虎国际电子游戏手机版 网址:www.wwyu-info.com 推荐:模乐虎,精密模乐虎加工,汽车模乐虎,电子游戏模乐虎  网站制作:保定遨游公司

必发88|官网乐虎游戏官网老虎机必发88|官网